|Minimum Order Quantity||5000 Meter|
|Unit Length||200 MTS|
|Size||40mm to 160mm Outside Diameter|
We are one of the leading manufactures of DWC pipes. We are manufacturing this product since last 1 year. Our product is CE Certified and we are manufacturing it as per IS-14930 Part II. The main raw material used to manufacture this pipe is HDPE ( High Density Polyethelene). The main purpose of our DWC pipe is to protect the underground cables . Any kind of electrical, telecom or optical fibre cables can be passed through these ducts. As cable are of different sizes these ducts are also manufactured in different sizes. Once laid down these pipes there is no need to change or replace these pipes for years to come. Hence cable can be protected for years without any disturbance or breakage. These pipes have proved its mettle over the metal, hume, and concrete pipes as they are light in weight and easy to lay and are even cost effective.
Other important applications and technical specifications:
The inner wall of the duct is smooth which facilitates easy insertion of cables. It can be manufactured in coil form also. We reccend going for coils in small sizes as they are easy to transport. Bigger sizes also coil cab be given but it is not advisable as it becomes very bulky and is difficult to transport the same as it occupies a lot of space. Therefore we give 6 mts bar in big sizes.
These pipes are widely used in all departments of India like CPWD, PWD’s, Mumcipal Corporations, Indian Railway, Airport Authority Of India, big government contractors such as Gammon India, L &T etc.
These pipes are preferred over conventional methods of laying bricks or using conventional pipes. It has higher ring stiffness and crush resistance capacity compared to polymer plain pipes.
Advantage of HDPE
Very Good resistances to Corrosion
Available in various colours on demand.
Good impact strength.
Good Abrasion Resistances
Weathering is Less
Advantage due to DWC Corrugation
Saves in Raw Material.
Excellent Ring Stiffness.
Smooth inner wall, hence minimum friction loss
Even when bent the roundness of the pipe is retained
Moderate Flexibility takes care of Soil Settlement if any.
Takes heavy earth loads
Very easy Jointing
Method Of Jointing
Our pipes can be joined in various ways. Here are the ways in which we can join these pipes.
Snapfit coupler with rubber ring
Heat Shrink Sleeves
Bends Tees Reducers
Unique Features On request
1) Anti Rodency: These pipes can be made anti rodent if you require it in order to avoid rodent attacks.
2) Non Flame Propagating properties: These pipes can be made fire retardant too. This will act as a resistance to flame propagating.
I.D 32mm----O.D 40mm.
I.D 38mm----O.D 50mm.
I.D 51mm----O.D 63mm.
I.D 63mm---O.D 77mm.
I. D 75mm---O. D 90mm.
I. D 95mm--O. D 110mm.
I. D 103mm--O. D 120mm.
I. D 135mm--O. D 160mm.
Rates shall be given on special request
Fittings available are: 1) Snapfit coupler To Join
4) End Cap.
|Minimum Order Quantity||100 Meter|
|Unit Length||200 MTS|
We are one of the leading manufacturer of double walled corrugated pipes used for ducting purposes from i. D 32mm,i. D 38mm,i. D 51mm & i. D 63mm respectively used for ducting purpose in infrastructure, telecom, electrical industries. Dwc pipes have higher ring stiffness & crush resistance capacity as compared to polymer plain pipes. The product has proved its mettle, utility & multi fold advantages over conventional methods of laying bricks or using any conventional pipes. Our products are ce certified and confirms is 14930/2001(part ii) standards.
|Minimum Order Quantity||1000 Meter|
|Diameter||ID 32mm*OD 40mm|
|Packing Type||200mts coils|
|Place Of Origin||Sarigam,Gujarat|
|Is It Recyclable||Recyclable|
|Minimum Order Quantity||500 Meter|
We are one of the leading Manufacturer of DWC Pipes in Gujrat , We manufacture the Pipe as Per IS 16930 (Part 24) .
We manufacture these pipe under the brand name "V-Corr"and in Fol Sizes ID 32mm---OD 40mm, ID 38mm---OD 50mm, ID 51mm---OD 63mm, ID 63mm----OD 77mm , ID 75mm--OD 90mm, ID 95mm--OD 110mm, ID 103mm---OD 120mm, ID 135mm---OD 160mm Respectively .